Interested in ordering from the US? Please contact us for a quote.

SERVICE REQUEST  |  PLAN YOUR GYM

    Clear
    Preventative Maintenance - Residential

    AKFIT Preventative Maintenance - Residential

    C$139.00

    • Preventative Maintenance - Residential

      AKFIT

      AKFIT Preventative Maintenance - Residential

      SKU: RSCPM

      C$139.00 

      REQUEST A QUOTE
      Please fill out our preventative maintenance request form above to obtain your custom quote. Additional rates may apply outside of the Sudbury area.
      Product description

      Preventive maintenance should be performed on a regular basis. Performing routine preventive maintenance actions will aid in providing safe, trouble-free operation of equipment and extension of the product's lifespan.

      Read on to learn about what our protocols typically involve:

      Strength Maintenance Protocol

      Clean upholstery and frame
      Inspect upholstery for tears and rips.
      Apply light coating of automotive wax to metal frame parts as protective layer against moisture where
      required.
      Address signs of paint damage or rusting to increase the longevity of equipment.
      Inspect frame and welds
      Inspect hardware for looseness, tighten as required.
      Inspect all cables, cable ends and belts for tension, non-uniformity, wear or damage along their entire
      length.
      Inspect all handles and grips for wear or damage, particularly handle connecting points.
      Inspect all snap links for proper latching or wear.
      Inspect all labeling for readability; this includes placards, warning and caution decals.
      Inspect all weight stacks for proper alignment and smoothness of operation.
      Wipe all guide rods clean, and lubricate
      Inspect all adjustment points and ensure proper operation.
      Inspect all weight pins and pop pins to ensure proper operation.
      Inspect cosmetic housing for cracks
       

      Cardio Maintenance Protocol

      Treadmills:

      All treadmills need to be installed on a dedicated circuit with independent grounds as per manufacturer’s
      specifications. This is important for proper function and safety reasons. It will also extend the life of certain components.

      Clean perspiration and dirt from the console, grips and painted surfaces.
      Remove covers to vacuum inside machine, cleaning around motors and electronics.
      Clean Treadmill deck and belt surface to minimize the effect of friction that dirt patches can cause
      between the running deck and belt.
      Inspect belt for wear and deck for grooves or bare wood exposed.
      Adjust running belt to ensure properly tensioned.
      Ensure belt is properly lubricated.
      Inspect cables and grips for wear and replace as needed.
      Inspect all hardware to ensure it is tightened.
      Inspect motor brushes
      Inspect frame and welds
      Inspect power cords (if present) for damage in the housing or to the outlet prongs.
      Inspect tension of drive belt.
      Inspect all cables and connections
      Inspect LED function
      Inspect frame, welds and connections
      Perform functionality tests to ensure all features are performing properly.
      Perform amp draws to measure resistance and wear.
      Perform software diagnostics
      Record Odometer reading and hours of usage
      Test all keypad functions
      Inspect cosmetic housing for cracks
      Inspect motors and rollers
       

      Elliptical/Ascent Trainers:

      Clean perspiration and dirt from the console, grips and painted surfaces.
      Remove covers to vacuum inside machine, cleaning around motors and electronics.
      Clean wheels and rollers
      Inspect welds and frame
      Inspect all cables and connections
      Inspect all hardware to ensure it is tightened.
      Verify battery voltage
      Inspect belts for tension and excessive wear
      Inspect power cords (if present) for damage in the housing or to the outlet prongs.
      Record Odometer reading and hours of usage
      Test all keypad functions
      Inspect cosmetic housing for cracks
      Inspect flywheel
      Inspect arm/pedal linkage system
      Inspect motors and resistance system
      Perform amp draws to measure resistance and wear.


      Bikes:

      Clean perspiration and dirt from the console, grips and painted surfaces.
      Remove covers to vacuum inside machine, cleaning around motors and electronics.
      Inspect welds and frame
      Inspect all cables and connections
      Verify battery voltage
      Inspect belts for tension and excessive wear
      Inspect all hardware to ensure it is tightened.
      Inspect pedals and ensure they move freely and smoothly.
      Inspect seat and adjustments
      Record Odometer reading and hours of usage
      Test all keypad functions
      Inspect and adjust braking/tension system
      Inspect flywheel
      Clean and lubricate chains
      Inspect cosmetic housing for cracks
      Perform amp draws to measure resistance and wear.


      Climbers/Steppers

      Clean perspiration and dirt from the console, grips and painted surfaces.
      Remove covers to vacuum inside machine, cleaning around motors and electronics.
      Inspect welds and frame
      Inspect all cables and connections
      Verify battery voltage
      Inspect belts for tension and excessive wear
      Inspect all hardware to ensure it is tightened.
      Inspect springs, cables and chains.
      Inspect pedals and ensure they move freely and smoothly.
      Inspect pedal linkage system
      Record Odometer reading and hours of usage
      Test all keypad functions
      Inspect cosmetic housing for cracks
      Perform amp draws to measure resistance and wear.


      Rowers:

      Clean perspiration and dirt from the console, grips, painted surfaces and rail.
      Remove covers to vacuum inside machine, cleaning around motors and electronics.
      Inspect and lubricate chain/belt
      Inspect chain/handle connection for wear.
      Inspect and tension shock cord.
      Inspect all hardware to ensure it is tightened.
      Inspect welds and frame
      Inspect cosmetic housing for cracks
      Inspect and clean wheels and rollers

       

      AKFIT recommends this add-on when purchasing new strength or cardio equipment. Get the most out of your investment by keeping it in top condition!

      Reviews


      0 stars based on 0 reviews

      Login

      Forgot your password?

      • All your orders and returns in one place
      • The ordering process is even faster
      • Your shopping cart stored, always and everywhere

      compare0